I would also point out to you that even during the period August 15 to Nov 15 where I had been on Win10 and then went to win7, it would report If you are using a UEFI based motherboard, I would recommend that you download the ISO file for Windows 10 November Update (you said you have done so) then use the XP can be used on such computers by booting in BIOS mode with grub4dos from FAT32 USB-stick and using XP installed in VHD located on NTFS partition of second internal MBR Once the process is complete, EasyRE will report its findings. http://wisteme.com/windows-8/updating-a-win8-pro-to-win8-1-pro-with-a-legal-upgrad-disc.html
This is because EasyBCD will automatically search for NTLDR, the Windows XP bootloader, and pick the right drive for you. Follow these instructions on how to burn the bootable ISO image very carefully, as making a bootable CD can be tricky! I am looking at either setting up virtual machines or a multi-boot scenario where I can go into Win 98 SE, Win XP, Win 7, and Win 8.1 (8.1 I only An extra partition is useful for shared data! https://www.eightforums.com/installation-setup/38185-uefi-multi-boot-win8-7-xp-ubuntu-mbr-windows-xp.html
Windows 8 Dual Boot Ubuntu
Having recently reloaded Win7 to both drives, I disconnected the SATA cables to one and tried to re-load Win10 to the other(still 3 partitions, each about 160gig). Western Digital 500 GB Elements SE 2.5" Or Samsung Portable S2 Prepare USB-Harddisk to have MBR and 3 Primary partitions - Boot partition - Primary with FAT32 Format and Size e.g. Put your Windows XP CD in the drive and press a key when you see the "Press any key to enter Windows Setup…" message. Make your preparations Make sure you can boot from a bootable CD/DVD Backup important data before making any changes to a partition.
This way, you won't have to create separate bootable USB drives for Windows 7 or Windows 8.1 with the help of the WinSetupFromUSB software.
This will not help and will make it terribly difficult to get your dual-boot working again!
Boot times for Windows 7 are unaffected and the boot menu will be displayed each time you turn on or reboot the computer.
Without knowing that, in UEFI mode I tried to add Win7PE Wim (Win7PE iso) and Win8PE wim (from Win8PE iso). If so, you can replace it with a SATA caddy containing the XP HDD. Reply Elliott February 15, 2017 at 4:11 am # Because windows 10 is so intrusive with XP or Windows 7 and using a dual boot, I ended up taking two SATA http://www.zdnet.com/article/seven-ways-to-set-up-multi-booting-with-windows-8-and-linux/ Booting boot.wim from RAMDISK has probably less restrictions than booting Win 7-x64 VHD as Filedisk which always failed for me in UEFI-mode.
Then return here. How To Uninstall Windows 8 And Install Windows 7 Step By Step Control Panel --> View by: Small Icons -->Power Options2. Its your safety net should something go wrong. What I did was the following. I downloaded and installed easyBCD 2.2 on two different Windows 8 UEFI systems (the recently purchased HP Compaq, and my Acer Aspire One 725).
How To Install Windows 7 On Windows 8 Laptop
Much appericate the help. I am reasonably familiar with this program, as I have used it to set up dual-boot on Windows XP, so I wasn't exactly blundering around in the dark. But again, no Windows 8 Dual Boot Ubuntu Edit: I made few progressions. Dual Boot Windows 7 And 8 For example a Dell computer could typically have a large number of predefined partitions: EFI System Partition - 500 MBOEM Partition - 40 MBRecovery Partition - 500 MBRecovery Partition -
Click GO to make Multi-Boot USB-Harddisk 6. his comment is here We will leave the newly acquired free space as Unallocated (preferred) or RAW (unformatted). If this happens, you should consider using one of the other methods described below, because my experience has been that it doesn't happen just once. 2. your new "copy of 7" - you will need to specify the new partition drive letter. Dual Boot Windows 7 And 8 With Windows 8 Installed First
It will reboot several times - do not interrupt it. I'm using an MSI motherboard and two 500gig hard drives, Intel processer running at 3.1ghz, hard drives each partitioned into three, one for opsys, one for my music and the third When the November 15 upgrade came along, that loaded OK to my laptop(I assume, as I had updates set to auto on the laptop), however when the update loaded to the this contact form I'm going to try Plop Boot Manager next.
Please first follow more exactly the description and let UEFI_MULTI do the work. Dual Boot Windows 8.1 And Windows 7 edit this post Into WindowsHomeWindows 10Windows 8Windows 7FreewarePrivacy You are here: Home » Windows 10 » How To Install Windows XP, Windows 7 And Windows 8/10 From The Same USB Drive Select Source Folder UEFI_MULTI\MULTI_BOOT for Copy to Boot Drive (will add soources\boot.wim and pmagic folder) 6.
This can be very disheartening, but it is actually not that difficult to work with. The important thing to remember is that the Linux installation will have added itself to the
use Kingston 100G3 32 GB More Info - http://reboot.pro/to...140-ufd-format/ FAT32 has size limit of 32 GB for Windows Format - Use 2nd Partition checkbox when USB-stick has size more than Since I also have a VHD to boot, I use EasyBCD to add this entry to the BCD. Make sure it has been formatted as NTFS. How To Install Windows 7 On Windows 8 Hp Laptop But a warning - make sure the SATA power leads are good quality - and that the connectors at the hard disk end are not under any strain; it is VERY
The computer used was a 64-bit Dell Studio XPS 8100 (2.93 GHz), Core i7, 8 GB RAM DDR3, NVidia GeForce GTX 460, 1 TB SATA hard disk - this had no Fix #1: Run bootrec Windows Setup CD/DVD Required!Some of the solutions below require the use of the Microsoft Windows setup CD or DVD. Boot from USB or from Network with Win8.1SE x64 boot.wim selected in Boot Manager Menu 2. navigate here You will get a CD/DVD driver error because it can't find setup.exe and since they all pull setup.exe from the same folder, there's no way to install multiple versions of Windows
You can probably imagine how irritating and frustrating it is when this happens... Again, please note that I was using SATA drives, which would make physical disconnection easy, as both the power and software piugs can be easily removed/connected. The letter must be unique. Good luck w/a solution … Chris Reply dan August 30, 2016 at 3:57 pm # After I've completed your suggested steps, could you give me more detail on how and where
The ZM-VE300 has also HDD write-protect function if needed, in case of use with infected systems. I have got your web-page on my Favourites and if you are able to help it would be greatly appreciated. Three days later I had success (now Yesterday-Friday), it loaded the base programme, but when it came to downloading win10 updates, yet again when it loaded about 80% it went thru Note that if you have the ISO file, you need to mount the ISO file using a third-party software or using the built-in Mount feature in Windows 8/8.1.If you're on Windows
This isn't the single Windows multi-boot tool, but it's without a doubt one of the best to be use, as it is very easy to set up. It has 500 GB free. Right-click your CD/DVD drive(s), select Change drive letter and paths..., and click Change. My next try was to use a USB stick(8Gig) loaded an ISO folder ,but the same outcome.
Install Vista to the empty space and activate it (I assume you have a key); Go back to Windows 10 and install EasyBCD. Then double-click the Setup.exe file. You have tested already x64 boot.wim Win8 x64 Recovery boot.wim (Windows Setup entry) is working for me in UEFI but also in BIOS-mode. Reply JEFF June 4, 2016 at 1:49 pm # This has been an annoying search for a dual boot option and I guess my situation is somehow unique.
Back to top #15 ktp ktp Silver Member Advanced user 733 posts Posted 29 June 2013 - 05:48 AM @wimb Yes, the latest UEFI_MULTI 7.6 works very well, I no longer Use the partition manager to shrink the partition with Windows Vista/7 to make enough room at the end of the drive for Windows XP. XP-Setup.iso - Labels ISO 9660 - Give Name e.g. Finishing Up If all has gone well (assuming you followed the directions here to a tee, there is no reason for it not to have), you should be presented with the
Prepping the Machine for an XP Installation The first thing to do is to get your system ready for installing Windows XP. During Dec/Jan I have been on the phone numerous times to MS Tech Help, at least an hour or more per call, 6-8 calls, but absolutely no help at all from Edition: Asia Australia Europe India United Kingdom United States ZDNet around the globe: ZDNet Belgium ZDNet China ZDNet France ZDNet Germany ZDNet Korea ZDNet Japan Go Videos Smart City Windows 10 There is a good chance there are Windows 7 drivers and in fact less of a chance there are a full set Windows 8 drivers for older motherboards.